Stone worktops in Barnet

Quartz, granite, porcelain, marble and quartzite kitchen worktops, cut to a template of your kitchen and installed in homes across the borough, from High Barnet and Whetstone to Finchley, Edgware and Colindale. New kitchens, replacements on existing units, islands and splashbacks, made to fit properly first time.

Request a quote Call 020 8175 5558

New kitchens · Replacement worktops · Islands · Splashbacks

Worktops cut for your kitchen, not from a price list

Every kitchen is templated before any stone is cut.

Most people come to us with one of three jobs: worktops for a new kitchen that is being fitted, a replacement for laminate or wood that has had its day, or an island that needs to look right from every side. The process is the same for each. You send rough sizes and your choices, we call or email to go through them and quote, and once you go ahead we template the kitchen. We cut the stone from that template, with the openings for your sink, hob and taps, and then fitted.

Templating matters more in Barnet than you might expect. A lot of the houses in New Barnet, East Barnet and Finchley are Victorian or Edwardian, and their walls are seldom straight. A worktop cut to a template follows the wall, so the back edge sits tight and the upstand or splashback doesn't have to hide a gap.

Five worktop materials we fit

How each is made, how it wears and what it needs from you.

Material	What it is	Living with it
Quartz	Engineered surface	Consistent colour from slab to slab, never needs sealing, wide choice of plain and marble-effect designs. Use a trivet for hot pans.
Granite	Natural stone	Hard-wearing and heat-tolerant, with pattern that varies across each slab. Some need occasional sealing.
Porcelain	Fired ceramic slab	Slim profiles, shrugs off heat, stains and sunlight. Edges and joins take careful planning.
Marble	Natural stone	Beautiful veining and a cool surface, but acids etch it. Best for people happy with a lived-in look.
Quartzite	Natural stone	The look of marble with far more hardness. Not the same as quartz, so check the stone before you buy.

Not sure which? The material comparison guide puts appearance, care and cost side by side.

The jobs we do

From a single run of worktop to a whole kitchen with an island and full-height splashback.

Worktops for a new kitchen

We template once your units are fixed and the sink and hob are chosen, then cut and fit the stone.

Request a quote

Replacement worktops

Keep your cabinets and swap tired laminate or wood for stone, with new cut-outs for the sink and hob.

Replacing worktops

Islands and breakfast bars

Seating overhangs, waterfall ends, and a sink or hob in the island, planned before cutting.

Stone kitchen islands

Upstands, splashbacks and sills

Stone to match your worktops on the wall behind the sink and hob, cut around sockets and windows.

Splashbacks and upstands

Smaller pieces too: vanity tops, window sills and shelves, sometimes cut from offcuts.

How a worktop job runs

You send the details
Rough sizes, the material you like, the sink and hob, and any photos. We call or email to go through it and send a quote that lists what is included.
We template the kitchen
Once you go ahead and the units are fixed and level, we take an exact template, including every wall, corner and opening.
Cut, fitted, handed over
The stone is cut to the template, then fitted, joins finished and edges checked. You get care advice for your stone at handover.

Templating and fitting, step by step

What decides the price

Two kitchens with the same worktop area can cost quite different amounts. These are the things that make the difference, and the things your quote sets out.

Read the cost guide

The stone: The material, the design and how many slabs your layout uses once joins and pattern are allowed for.
Cut-outs: Openings for the sink, hob and taps, plus any drainer grooves or socket holes.
Edges and joins: The edge profile you choose, mitred or thickened edges, and where joins fall.
Extra pieces: Upstands, splashbacks, window sills and waterfall ends.
Access and removal: Stairs, lifts and parking, and taking away the old worktops if that is part of the job.

Worktops in Barnet homes

Local things that change how a worktop is chosen, cut and fitted.

Some of London's hardest water

In a 2024 comparison of Thames Water data, Barnet had the hardest water of the 32 London boroughs measured, so scale builds up fast round taps. Quartz, granite and porcelain shrug it off; marble needs gentle, non-acidic cleaning. A stone splashback behind the sink saves scrubbing scale out of grout.

Conservation areas

Barnet Council has 16 conservation areas. In High Barnet, the Wood Street conservation area, first designated in 1969, takes in the shops on Barnet Hill around St John the Baptist church and runs west along Wood Street. Monken Hadley, to the north, includes Hadley Green and the church of St Mary the Virgin, close to where the Battle of Barnet was fought in 1471. The controls mainly cover outside changes, so new worktops inside an unlisted house don't normally need permission.

Flats and narrow halls

Stone is heavy and some pieces are long. Kitchens in flats, upstairs or at the back of a terrace need the route in planned, and occasionally a join where one long piece won't make the turn. Tell us the floor, the lift and any tight spots when you enquire.

Areas we cover

We cover the whole London Borough of Barnet. Choose your area for local notes on housing, conservation areas and getting the stone in.

Postcodes EN5, EN4, N20, N14, N12, N11, HA8, NW9, NW2. Just outside? Send your postcode and we will tell you whether we can help.

All areas and postcodes

Worth reading before you choose

All guides · FAQs

Quartz, granite, porcelain, marble or quartzite?
How they look, how they wear and what each needs.
What affects the price of stone worktops
Slabs, cut-outs, edges, extras and access, explained.
Engineered stone and silica
What the 2026 safety guidance changed, and lower-silica options.
Looking after a stone worktop
Cleaning, sealing, heat and limescale.

Questions about worktops in Barnet

What should I send for a first price?

A rough sketch with the length of each run, your postcode, the material you have in mind and your sink and hob plans. Photos of the kitchen help. You don't need exact measurements: we take those at templating.

Can you fit stone on my existing kitchen units?

Usually, yes, if the units are level, firmly fixed and in good condition. See replacement worktops for what changes when the old tops come off.

Which surfaces are easiest to keep clear of limescale?

Quartz, granite and porcelain all shrug off scale and can be cleaned with the descalers their makers approve. Marble is the one to be careful with, because acidic limescale removers etch it.

I live in a conservation area. Does that affect new worktops?

Not usually. Barnet's conservation area controls mainly cover outside changes, so new worktops inside an unlisted house don't normally need permission. For a listed house, speak to the council before work starts.

Is my street in your area?

We work across Barnet and the neighbourhoods around it, in the EN5, EN4, N20, N14, N12, N11, HA8, NW9, NW2 postcodes. Include your postcode when you enquire and we'll let you know.

Get a price for your worktops

Send a rough layout, your postcode and the stone you're considering, and we'll call or email to go through it and price the job.